CHANGE OF CONFIGURATION (reset)
The unit allows to change some default factory settings using the controls in the amplifier´s panel. The
firmware which is described here is the 1.20 version.
TM
However, gain and delay only can be changed with
DASnet
.
To re-establish the default factory settings
(Number of units/Throw/gain/delay...)
without using DASnet the
system has to be switched ON while pressing the Throw button.
By doing this the cabinet will be set up with the Number of units correction to 1 unit and the Throw to MID.
13
NUMBER OF UNITS
UNIT NAME
STAGE / VENUE
THROW
100-230 V~ 50/60Hz 420W
AC INPUT
MAX. 7@230V / 3@115V UNITS AERO 20A
AC OUTPUT
ID DASNET
step 2
turn the
PowerCon
Manual del Usuario
/ aero series /
User’s Manual
step 1
hold
pressed
