Czar PP-8300 User Manual Download Page 20

Page: 20 / 91

Advanced Menu

The Advanced Menu allows you to configure the settings of CPU, Super I/O, Power Management,

and other system devices.

▶

Note

Beware of that setting inappropriate values in items of this menu may cause system to malfunction.

The options and default settings might be different by RAM or CPU models.

Launch PXE OpROM

This item enables or disables boot Options for legacy network devices with option ROM. Options:
Disabled (Default) / Enabled

Launch Storage OpROM

This item enables or disables boot Options for legacy mass storage devices with option ROM.
Options: Enabled (Default) / Disabled

Launch Video OpROM

This item enables or disables execution of the legacy option ROM for video devices.

Options: Enabled (Default) / Disabled / Enabled when no UEFI Driver

Summary of Contents for PP-8300




























































































Search results

Summary of Contents for PP-8300

Reviews:

Related manuals for PP-8300

Brands by name

Popular brands

Czar PP-8300, User Manual

Search results

Summary of Contents for PP-8300

Reviews:

Related manuals for PP-8300

Brands by name

Popular brands