Cytron Technologies CuteDuino, User Manual

Page: 9 / 29

ROBOT . HEAD to TOE
​
Product User’s Manual –
​
CuteDuino
Micro USB B type (female)
This connector is for USB connection to upload program or power it via USB cable. A USB
Micro-B type cable is needed.
Power LED
Power LED will light ON once the board is powered.
Programmable LED
Programmable LED is active HIGH and it is connected to pin 1 (Arduino designation).
5V voltage regulator
This type of voltage regulator can handle up to 1A maximum.
ATtiny85
CuteDuino uses ATtiny85 as main controller running at 16MHz internal oscillator.
Pads for header pin
CuteDuino pins can be extended to breadboard by soldering the header pin to these pads.
Reset button
Reset button can be used to enter bootloader mode or restart program.
3mm hole
This hole can fit standard
​ PCB stand ​ .
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
9