cytiva Monitor UVis-920, Operating Instructions Manual, Page: 7 / 94

1.2 Important user information
Read this before operating the
product
All users must read the entire Operating Instructions before installing, oper-
ating or maintaining the product.
Always keep the Operating Instructions at hand when operating the product.
Do not operate the product in any other way than described in the user documenta-
tion. If you do, you may be exposed to hazards that can lead to personal injury and you
may cause damage to the equipment.
Intended use of the product
Monitor UVis-920 is a UV and visible light absorption monitor for use in liquid chroma-
tography.
Monitor UVis-920 is intended for research use only, and shall not be used in any clinical
procedures, or for diagnostic purposes.
Prerequisites
In order to operate Monitor UVis-920 in the way it is intended:
•
The user must be acquainted with the use of bioprocessing equipment and with the
handling of biological materials.
•
The user must read and understand the Safety instructions chapter in the Operating
Instructions.
•
The system must be installed according to the instructions in the Installation
chapter of the Operating Instructions.
Safety notices
This user documentation contains safety notices (WARNING, CAUTION, and NOTICE)
concerning the safe use of the product. See definitions below.
WARNING
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury. It is important not to proceed
until all stated conditions are met and clearly understood.
1 Introduction
1.2 Important user information
Monitor UVis-920 Operating Instructions 29055049 AF 7