cytiva AD-900, Instructions Manual

Page: 5 / 12

Step Action
4 Connect wire 2 (red) to the external device low output.
5 Connect the module with two UniNet cables as a part of the UniNet 2 chain.
One UniNet cable is supplied with the module.
Note:
The power on-LED on AD-900 flashes for a few seconds when connecting the
UniNet cable. The light gets steady when the communication with UNICORN is
established.
6 If more than one AD-900 module will be connected, set the ID switches as
follows:
1 2 1 2
Code 0 Code 1 Code 2 Code 3
1 2 1 2
NO
Code 0 shall be used if only one AD-900 is used.
UniNet 2 cables are used to interconnect the individual modules.
7 Attach the module to the mounting slot on the ÄKTAdesign system.
Attach
to slot
Lock
Release
AD-900 Instructions 56314038 AD 5