Mounting in Partition Walls
To mount the KT03 in a partition wall:
1 Cut an appropriately sized hole (155 x 99 mm).
2 Insert the supplied screws to the partition locking pins and tighten it just
enough to hold the partition locking pins in place.
3 Place the KT03 on the wall.
4 Tighten the four screws through the four partition locking pins. The pins will
rotate and ultimately clamp the touchscreen assembly to the wall.
Mounting in Solid Walls
To mount the KT03 using the Wall Mount box:
1 Create a hole in the wall of the appropriate size according to the Wall Mount
Box.
2 Pull the cable through the Wall Mount box and place the Wall Mount box into
the wall.
The Wall Mount box must be mounted with the correct orientation
with the Touchscreen assembly. There is an outline of the KT03
engraved on the Wall Mount box which shows the correct orientation
for second fix.
3 Insert the supplied screws into the four holes and tighten them to fix the
Touchscreen assembly to the Wall Mount box.
Attaching the Front faceplate
1 Position the front faceplate over the touch screen with the speaker window
on the right. Hook the top of the front faceplate over the top of the KT03.
2 Press the bottom of the front faceplate with the catches over the bottom of
the KT03 until you hear it snap into place.
Removing the Front faceplate
The front faceplate must be removed in order to reprogram the KT03 via the
USB port.
1 Hold the front faceplate and apply pressure downwards to the bottom of the
KT03.
2 Pull the faceplate away from the bottom side keeping the top side catch in
place. Be gentle with this in order as not to pull away the Speaker wire from
the Speaker mounted on the faceplate.
Firmware Upgrading
The KT03 Firmware can be upgraded using the KT03 USB port and
Comfigurator software. KT03 firmware may be updated from time to time to
introduce new features or to improve performance or fix bugs. Firmware files
with .cbf extension can be downloaded from
http://www.cytech.biz/kt03_firmware.html
In Comfigurator, go to Transfer > Firmware Upgrade > For UCM or KT03
Direct to PC, and select the .cbf file.
KT03 Installation Manual
Page 8 of 12
