Cyrus Straight Line
INSTALLATION
5
English
CONNECTING POWER TO THE UNIT
The moulded IEC connector of the mains lead supplied
should be plugged in to the power inlet
on the rear of
the unit.
The mains fuse
is located on the rear panel next to the
power switch. It must only be replaced with the following
types:
U.K. / Europe - 230V
T1A/20mm
N. America / Far East - 115V
T2A/20mm
In the U.K., the
Cyrus Straight Line
comes with the mains
plug fitted. In the unlikely event that the plug fuse should
need replacing ensure that it is only replaced with a 3
Amp Fuse.
CONNECTING A TAPE RECORDER
Two phono cables are necessary for connection of a tape
recorder. Connect a phono cable from the Output or
Playback sockets of the tape recorder to the Tape Input -
TP IN
of the
Cyrus Straight Line
. Connect a second
phono cable from the Input or Record sockets of the tape
recorder to the Tape Record Output - TP OUT
sockets
of the
Cyrus Straight Line.
CONNECTING OTHER INPUTS
Connect a phono cable between each system component
and the rear panel sockets as marked on the rear panel
diagram. At all times observe the colour coding of the
phono cable for left and right channel identification. The
Cyrus Straight Line
provides for connection of a CD
Player -CD
, a tuner - TU
,
a Home Theatre decoder -
VI
and two auxiliary inputs - AU
and SP
.
The AU and SP inputs can be used for connection of a
wide variety of products such as a second CD player,
tuner or VCR, an electronic keyboard, an organ or a
second tape deck if only replay is necessary. Always
check the technical specification of these products before
connecting to your
Cyrus Straight Line
. Consult your
dealer if in doubt.
CONNECTING A TURNTABLE
The
Cyrus Straight Line
is a line level amplifier. If you
wish to play a turntable through your unit, you will need
an external phono preamplifier.
