Cyrus PSU-XR User Manual Download Page 7

5

Cyrus PSU-XR

User Instructions

Installation

1.  Power inlet 
2. 

PSU-XR Power output

3.  Upgrade port

Key to the rear panel drawing

MADE IN ENGLAND

UPGRADE

3

1

2

Connecting a PSU-XR to Cyrus Products

CAUTION: Use only the power interconnect supplied with 

the PSU-XR when connecting a PSU-XR to a compatible 

Cyrus product. Use of other interconnect cables may cause 

a safety hazard.
NOTE: The power interconnect is non-reversible.

•  Connect the power interconnect to the outlet on the 

back panel of the PSU-XR marked ‘PSU-XR OUTPUT’. 

Tighten the screw latches on the connector finger tight.

• 

Locate the power inlet marked ‘USE PSU-XR ONLY’ on 

the back panel of the partnering Cyrus product.

• 

Place the PSU-XR in a position where the free end 

of the power interconnect can reach this power 

inlet without stretching the cable or stressing the 

connectors.

•  Connect the power interconnect to the power inlet. 

Tighten the screw latches on the connector finger tight.

To avoid possible damage to your audio system, it 

is essential to disconnect all system components 

from the mains supply before connecting or 

disconnecting the system interconnects.

Important – read before making any connections Connecting to the AC mains supply

NOTE: When a PSU-XR is in use, both the PSU-XR and the 

partnering Cyrus product will require connection to the 

mains supply.
• 

Connect the  mains power cable to the power inlet on 

the back panel of the PSU-XR.

• 

Connect the remaining system power cables including 

connected PSU-XRs to suitable AC power outlets.

Power connections to PSU-XRs and other system 

components can be made in any sequence.

NOTE: The means to disconnect this product from the 

mains supply is the mains plug. Ensure that the mains plug 

is accessible at all times.

Summary of Contents for PSU-XR













Reviews: