Cyrus CS 40 Freestyle, User Manual, Page: 9 / 20

4.5 Holding a call
During the call, press the icon.
4.6 Mute during a call
Press the -icon during the call.
4.7 Switch between ongoing calls
To switch between two active calls, simply click on the caller interface.
4.8 Call options
The following options are available during a call:
1. Click on the speaker icon to use the speaker of your mobile phone.
2. Pull down the drop-down menu and click Bluetooth to use a Blue-
tooth device.
T I P :
Before using this function, make sure that the mobile phone
is paired with the appropriate Bluetooth audio device and
the connection is established
3. Click on the dialing field to enter the numbers.
4. Click » ADD CALL to add a call.
5. Click » RECORD CALL to record a call.
4.9 Call logs
Call records include all dialed numbers, incoming calls and missed
calls.
MAIN MENU » PHONE » CALL LOGS
1. Click on the right to call back.
2. Click on CONTACT » CALL DETAILS to view details of the number
and select further options.
4.10 Emergency call
N O T E :
Your network operator has set up one or more emergency
numbers. There are different emergency numbers in different
countries, so the emergency numbers of your mobile phone
are not valid in all regions. Under certain circumstances, an
emergency call may not occur due to overloading of the
network or disturbances.
MAIN MENU » PHONE
(if the mobile phone was locked, click Emergency Call).
1. Enter the emergency call number.
2. Click the Dial icon to dial the emergency number.
9
4.1 Dial panel
MAIN MENU » PHONE
Press the numbers on the dial pad to enter a phone number.
If you enter an incorrect number, you can press the to delete it
one by one.
If you want to delete the entire number, hold down the .
To make a call abroad, press and hold the 0 key to enter the international
call code „+“. Click the Dial button below the dialing field to call the
number you entered.
4.2 End a call
Click and press Hang Up to end a call.
4.3 Accept or reject a call
When you receive a call, the relevant caller information is displayed on
the screen. If you missed a call, you will receive a message.
Hold the -icon on the incoming call interface and slide it to the
green -icon to accept the call and slide it to the red -icon
to reject the call.
4.4 Reject via message
Slide the -icon up on the -icon to reject the call and send a
message with a reason for rejecting it.
4. Dial