Cyrus CS 40 Freestyle, User Manual, Page: 5 / 20

2.1 Insertion and removal of the SIM Card(s) and/or
SD Card(s)
Switch the mobile phone off, slide the pen into the side hole, and push
the pen until the SIM card slot protrudes slightly and you can remove
the slot. Place the SIM card(s) or a SIM card and an SD card in the
slot. Please place the cards as indicated by the slide-in frame and the
contacts point towards the back of the unit.
T I P :
SIM cards do not support changing while the device is
running (hot plug). Do not change the SIM card in stand-by
mode, as this could damage the card
2.2 Insertion and removal of the battery
The battery is built in.
N O T E :
The phone battery cannot be removed manually.
2.3 Charging the battery
Charge the battery completely as following:
1. Connect the Micro USB cable to the Micro USB port on the phone.
2. Insert the plug into the socket. The battery icon is now displayed
dynamically, indicating for the user that the device is charging.
3. When charging is completed, the symbol of a full battery is displayed.
T I P :
You can also charge your mobile phone via a USB data
connection and on the computer. If the battery of your
phone has been completely consumed, it may be impossible
to charge via a USB cable. Then you should definitely use
the charger to recharge the phone battery
3.1 Switch the device on/off
Press and hold the power key to turn the mobile phone on and off.
T I P :
It takes a moment to initialize the phone. Please wait patiently.
If the mobile phone is is turned on before the SIM card is
inserted, only some functions of the mobile phone can be
used normally. After the SIM card is inserted, the phone
automatically determines whether it can be used or not.
3.2 Locking and unlocking the screen
If the mobile phone hasn’t been in use for a period of time, the screen
becomes black to enter the screen-lock state and save battery power.
Lock screen/mobile phone: press the power button.
Unlock screen/mobile phone: Press the power button, the screen
lights up, and the screen-locked state
is displayed. Tap the unlock icon and
drag it up to unlock the screen. If you
have set the lock pattern or password
protection, the mobile phone will ask
you to draw the pattern or enter a
password.
MAIN MENU » SETTINGS » SECURITY » SCREEN LOCK »
SET SCREEN LOCK » PATTERN LOCK
1. SET UP THE SCREEN LOCK » PATTERN.
2. Look for the screen tip and the sample pattern and tap twice NEXT.
3. Use your finger to draw a connecting line between 4 points to draw
the pattern.
4. Tap NEXT.
5
2. Introduction
3. Basic functions