CY8CKIT-149 PSoC® 4100S Plus Prototyping Kit Guide, Doc. #: 002-20729 Rev. *E
38
A.2.5
Header Connections
The PSoC 4100S Plus Prototyping kit supports a number of unpopulated headers on both the Kit-
Prog2 and the target PSoC 4100S Plus boards.
A.2.5.1
Functionality of the J1 and J2 Headers (Target Board)
The target PSoC 4100S Plus board contains two single inline headers (J1 and J2). These headers
are both 1×30-pin headers and include all of the I/Os available on the PSoC 4100S Plus device.
These headers support all of the available ports, GND, VDDD, VDDA, and connections to passive
elements and user-input devices.
The
J1
and
J2
headers support 100-mil spacing, so you can solder connectors to connect the target
board to a development breadboard.
Figure A-5. J1 and J2 Headers
