Sequence Break
F²MC-16FX Family, Emulating and Debugging with Softune and MB2198-01, Doc. No. 002-04828 Rev. *B
63
In the above figure, notice the value of variable ‘b’ when event at Restart LV1 is triggered. It is not equal to 2;
hence event at Level 2 is not triggered.
In the above figure, notice the event at Level 1, 2 and 3 is occurred in sequence. Value of count variable is 1111.
Similarly, when we set Restart Level 2 event such that it occurs after the event set at Level 2 and before the
event set at Level 3 as shown below
When the program execution starts, it halts due to Sequence break, in a status bar message displayed is “
Break
at <Memory address>, by Sequential break
”
and corresponding line is highlighted by yellow background.
