Page
of
10
16
Handheld Reader Kit includes
Handheld Reader (shown),
Charging Dock,
and Base Unit.
See Credential Technologies
and Ordering Information, pg. 2.
Blue LED
(Communication
Status)
Green LED
(Card
Verification)
Power
Button
Case
Colors
Relay Control /
Vend button
Credential
Read Area
Red LED
(Power & Card
Acknowledge)
LED Indicators (Handheld Reader and Base Unit)
Handheld Reader LEDs
•
Red LED (top left - power & card acknowledge)
Illuminated: Handheld Reader’s power button is activated and unit is on.
Briefly blinks off then illuminates: A badge has been sensed.
•
Blue LED (top center - communication status)
Blinks continuously: Handheld Reader is communicating with Base Unit.
Not lit: Reader is not communicating with the Base Unit.
•
Green LED (top right - card verification)
Illuminated: Valid badge. Reader should also vibrate.
Base Unit Diagnostic LEDs
The Base Unit’s board has a diagnostic LED, located between the 2-pin and 8-pin header.
The diagnostic LED is bi-color and may display red, green, or red and green, depending on the status.
•
When the Handheld Reader is communicating with the Base Unit, the Base Unit’s diagnostic LED will
continuously flash green.
•
When the Handheld Reader is powered off or not communicating with the Base Unit, the Base Unit’s
diagnostic LED flashes red and green.
