Cypress FM0+ S6E1A1 Series, User Manual

Page: 48 / 54

System Debug Sample
FM3/0+ Family Fan Motor Control User Manual, Doc. No. 002-04392 Rev. *B 47
7.2.4 Debug Motor Running Status
7.2.4.1 Debug Start up
Set different parameters according to start up modes, for example:
1. Prepare Close Loop Start up Mode (default mode)
Set the parameters as shown in Figure 27 :
Figure 27. Parameters Watch
Window
Figure 28. Start up Current
Waveform
(100 mA/1s/scale)
2. Start up with no orient and open loop mode
Set the parameters as shown in Figure 29 . (Modify the
“
Motor1_Orient_TimeS
” and
“
Motor1_Initial_Speed_Pre_Close_Hz
” value on the basis of
Figure 27 ).
Figure 29. Start up with No Orient and Open
Loop Mode Parameters
Figure 30. Start up with No Orient and Open Loop
Current waveform (100mA/1s/scale)