CY8CKIT-046 PSoC® 4 L-Series Pioneer Kit Guide, Doc. #: 002-03344 Rev. *D
28
Code Examples
4. Build the code example by choosing
Build
>
Build <Project Name>
, as shown in
The
CY8CKIT_046_Deep_Sleep_Blinky
code example is used as an example in the following
images. A
.hex
file is generated after a successful build process.
Figure 4-2. Build Code Example from PSoC Creator
5. Connect the PSoC 4 L-Series Pioneer kit to the PC using the KitProg USB connector, J10, as
described in
Programming using PSoC Creator on page 25
to program the kit with this code
example. If this is the first time the kit is connected, wait for the drivers to be installed.
6. Choose
Debug
>
Program
in PSoC Creator as shown in
.
Figure 4-3. Program Device in PSoC Creator
