CY8CKIT-046 PSoC® 4 L-Series Pioneer Kit Guide, Doc. #: 002-03344 Rev. *D
25
Kit Operation
3.3.1
Programming using PSoC Creator
1. Connect the kit to the computer through the PCB USB connector, J10, as shown in
The kit will enumerate as a composite device when you plug in the PSoC 4 L-Series Pioneer Kit
to your computer for the first time. The kit drivers should be automatically installed.
Note
: The kit includes another USB connector (J11), which connects PSoC 4200L USB to the PC
and is meant for developing USB Full-Speed applications with PSoC 4200L. For KitProg
functionality, always use USB connector J10.
Figure 3-4. Connecting the PSoC 4 L-Series Pioneer Kit (KitProg USB) to a Computer
2. Open the desired project or Workspace in PSoC Creator from
File
>
Open
>
Project/
Workspace
. This provides the option to browse and open a previously saved project or
Workspace. If you want to open the code examples provided with the kit, follow the instructions
in the
Code Examples chapter on page 27
3. Select
Build
>
Build <Project_Name>
or press
[Shift] [F6]
to build the project as shown in
.
Figure 3-5. Build an Example
4. If there are no errors during build, program the firmware into the kit by choosing
Debug
>
Program
or press
[Ctrl] [F5]
, as shown in
. This programs the target PSoC 4200L
device on the PSoC 4 L-Series Pioneer Kit; the kit is now ready for use.
