CY8CKIT-046 PSoC® 4 L-Series Pioneer Kit Guide, Doc. #: 002-03344 Rev. *D
29
Code Examples
7. PSoC Creator opens the Select Debug Target window if the device is not already acquired.
Select
KitProg/<serial_number>
and click the
Port Acquire
button, as shown in
Figure 4-4. Port Acquire
8. After the device is acquired, it is shown in a tree structure below the
KitProg/<serial_number>
.
Click the
Connect
button and then
OK
to exit the window and start programming, as shown in
.
Figure 4-5. Connect Device From PSoC Creator and Program
9. After programming is successful, the green LED (LED3) on the board will toggle at a rate of
approximately 1 Hz.
