CY8CKIT-043 PSoC® 4 M-Series Prototyping Kit Guide, Doc. #: 001-97606 Rev. **
36
Code Examples
Figure 5-5. Connect Device From PSoC Creator and Program
9. Once programming is successful, the blue LED (LED1) on the board should start displaying the
breathing effect at approximately 1-Hz rate. From the Workspace Explorer in PSoC Creator, open
the
CE97634 PSoC 4 Breathing LED.pdf
as shown in
. This document provides details
of the code example.
Figure 5-6. Project Datasheet - CE97634 PSoC 4 Breathing LED.pdf
