December 2017
DocID029132 Rev 3
1/25
1
UM2042
User manual
Discovery kit for the ST25R3911B
high performance HF reader / NFC initiator
Introduction
The ST25R3911B-DISCO is a ready-to-use development kit to evaluate the functions of the
high performance HF reader / NFC initiator ST25R3911B in Reader mode for contactless
applications.
The ST25R3911B-DISCO kit supports
•
ISO 18092 (NFCIP-1) active P2P
•
ISO 14443A and ISO14443B
•
ISO 15693
•
FeliCa™
•
VHBR, with 6.8 Mbit/s PCD to PICC framing and 3.4 Mbit/s PICC to PCD framing
•
Up to 1.4 W output power with differential antenna
•
Possibility of driving two antennas in single ended mode, with automatic antenna tuning
(AAT) system
•
Inductive and capacitive Wake-up
•
User selectable and automatic gain control
•
Transparent and Stream modes to implement MIFARE
®
Classic compliant or other
custom protocols
The evaluation kit includes
•
the STM32L476RET6, a 32-bit microcontroller with 512 KB of Flash memory
•
a 105 mm x 52 mm, two turns antenna etched on the PCB, and its VHBR tuning circuit
•
a Micro-USB connector for communication with the host PC and board powering
•
six LEDs indicating the presence of the RF field and of the protocol used to communicate.
Figure 1. ST25R3911B-DISCO PCB (top view)
www.st.com
Summary of Contents for ST25R3911B
Page 16: ...Hardware UM2042 16 25 DocID029132 Rev 3 Figure 9 PCB layout top layer ...
Page 17: ...UM2042 Hardware DocID029132 Rev 3 17 25 Figure 10 PCB layout mid layer 1 ...
Page 18: ...Hardware UM2042 18 25 DocID029132 Rev 3 Figure 11 PCB layout mid layer 2 ...
Page 19: ...UM2042 Hardware DocID029132 Rev 3 19 25 Figure 12 PCB layout bottom layer ...
