CY8CKIT-043 PSoC® 4 M-Series Prototyping Kit Guide, Doc. #: 001-97606 Rev. **
34
Code Examples
Figure 5-1. Open Example Project from PSoC Creator
4. Build the example project by choosing
Build
>
Build <Project Name>
, as shown in
. A
.hex
file is generated after a successful build process.
Figure 5-2. Build Example Project from PSoC Creator
5. Connect the PSoC 4 M-Series Prototyping kit to the PC using the KitProg PCB USB port, J6, as
described in
Programming Using PSoC Creator chapter on page 17
code example. If this is the first time the kit is connected, wait for drivers to be installed.
6. Choose
Debug
>
Program
in PSoC Creator as shown in
