CY8CKIT-043 PSoC® 4 M-Series Prototyping Kit Guide, Doc. #: 001-97606 Rev. **
18
Kit Operation
Figure 3-2. Connecting the PSoC 4 M-Series Prototyping Kit to a Computer
2. Open the desired project in PSoC Creator from
File
>
Open
>
Project/Workspace
. This
provides the option to browse and open a previously saved project. If you want to open the
example project provided with the kit, follow the instructions in the
3. Select
Build
>
Build Project
or press
[Shift] [F6]
to build the project as shown in
Figure 3-3. Build an Example Project
4. If there are no errors during build, program the firmware into the kit by choosing
Debug
>
Program
or press
[Ctrl] [F5]
, as shown in
. This programs the target PSoC 4200M
device on the PSoC 4 M-Series Prototyping Kit; the kit is now ready for use.