CY8CKIT-043 PSoC® 4 M-Series Prototyping Kit Guide, Doc. #: 001-97606 Rev. **
33
5.
Code Examples
This chapter explains the code example provided along with the PSoC 4 M-Series Prototyping Kit as
well as how to use the built-in PSoC Creator examples with the kit. To access the code example,
download and install the CY8CKIT-043 PSoC 4 M-Series Prototyping Kit setup file from
. After installation, the code example will be available in the
Firmware
folder in the installation location.
For more code examples, visit the
PSoC 3, PSoC 4, and PSoC 5 code examples page
, which lists all
PSoC Creator code examples available across application notes, kits, and PSoC Creator.
5.1
Using the Kit Code Example
Follow these steps to open and use the code example provided with the kit.
1. Launch PSoC Creator from
Start
>
All Programs
>
Cypress
>
PSoC Creator<version>
>
PSoC Creator <version>
.
2. On the
Start Page
, click
CY8CKIT-043
under
Examples and Kits
>
Kits
. The code example
CE97634 PSoC 4 Breathing LED
, shipped with the kit, appears (see
).
3. Click on the example project and save it at a desired location.
