CY6611 EZ-USB HX3PD Evaluation Kit Guide, Document Number: 002-26068 Rev *A
7
1
Introduction
The CY6611 EZ-USB
®
HX3PD EVK is based on the Cypress’ EZ-USB HX3PD Hub controller (CYUSB4347-BZXC). HX3PD is a
family of USB 3.1 Gen 2 (10 Gbps) Type-C Hub controllers with USB Power Delivery (PD) that complies with the USB 3.1 Gen 2
specification, and the latest Type-C and PD standards. CYUSB4347-BZXC is a USB-IF certified USB 3.1 Gen 2 (10 Gbps) hub
silicon (TID # 5030000008). The CY6611 EVK is a 7-port evaluation kit designed to demonstrate the USB 3.1 Gen 2 hub, PD 3.0
and Battery Charging (BC 1.2) functionalities of the HX3PD controller.
1.1 Kit Contents
The following are the contents of the CY6611 EZ-USB HX3PD EVK:
CY6611 EZ-USB HX3PD EVK Board (One number)
19-V, 65.2-W AC/DC Power Adapter (One number)
USB Full-Featured Type-C Cable (One number)
Quick Start Guide
Figure 1-1. CY6611 Kit Contents
1.2 List of Recommended Hardware
See
for the list of recommended hardware for CY6611 EVK to demonstrate the various kit operations described in the
chapter. The recommended hardware can be replaced by equivalent hardware based on availability.
Table 1-1. List of Recommended Hardware
No.
Description
Manufacturer
MPN
1
Laptop with USB 3.1 Gen 2 (10 Gbps) and USB PD support
Lenovo
T470
2
USB 3.1 Gen 2 (10 Gbps) Solid State Drive (SSD) or Hard Disk Drive (HDD)
Samsung
T5
3
Smart phone with USB PD support
Xiaomi
Mi 6
4
USB 3.1 Gen 1 (5 Gbps) SSD/ HDD/ Flash Drive
SanDisk
-
5
USB 2.0 Flash Drive
Generic
-
6
Smart phone with BC 1.2 specification support
-
-
7
Apple device with support for Apple Charging
Apple
-
8
Digital Multimeter
Generic
-
9
USB Type-C to Type-A cable (Optional. Required for programming HX3PD
firmware from a PC/Laptop that does not have a Type-C port)
JAE Electronics
DX07519S10L19294
