7.2 Rear Panel
RS-232
HDMI Out
3
HDMI Out
2
HDMI Out
Power
1
DC 5V
ARC
Ethernet
HDMI Out
4
①
②
③
③
③ ④ ⑤
①
RS-232: This slot is to connect with 3.5Ø phone jack to D-Sub 9pin cable
inclucded in the package for RS-232 control signal and is for service only.
②
HDMI Out 4/ARC/Ethernet: Connect Ethernet and Audio Return Channel
to capabilities of TV, the TV will pass the Ethernet and Audio signal via
HDMI input to HDMI port 4. The HDMI port 4 will separate the Ethernet and
audio and send it out from ARC and Ethernet ports. For the ARC, the user
had a TV with a built-in tuner or DVD player and wanted to send content
“upstream” from the TV back to the audio system to play any
multi-channel audio.
The HDMI Ethernet Channel, it can consolidates video, audio and data
streams into a single HDMI cable to the Ethernet Hub/AP to access the
Internet and it incorporates a dedicated data channel into the HDMI link,
enabling high-speed, bi-directional networking at up to 100Mb/sec to
control and search from the TV.
Note:
1. Be sure to connect devices with one of the new cables designed
to support HDMI Ethernet Channel functionality, either the Standard
HDMI Cable with Ethernet or High Speed HDMI Cable with Ethernet.
2. If the HDMI port 4 with the Audio and ARC are exist at the same time,
the ARC will be the
fi
rst priority to access.
③
HDMI Out 1~3: Connect each of the output ports to the HDMI display.
When more than one output connected, the HDMI output play identical
video signal simultaneously.
④
Power LED Indicator: The LED will illuminate when the power is connected.
⑤
Power: Plug the DC 5V power supply into the splitter and connect the
adaptor to AC wall outlet.
5
