FP+???
FP-???
FP+999 or FP-
999
Add Favorite PATTERN, ???=001~051
Drop Favorite PATTERN, ???=001~051
Inquire Favorite PATTERN status
FP+xxx
FP-xxx
FP+??? FP-??? …
FT+???
FT-???
FT+999 or FT-
999
Add Favorite TIMING, ???=001~039
Drop Favorite TIMING, ???=001~039
Inquire Favorite TIMING status
FT+xxx
FT-xxx
FT+??? FT-??? ...
HDC000
HDC001
HDC999
set HDCP Off
set HDCP On
Inquire HDCP status
HDC000
HDC001
HDC???
MOT001
"Custom
String"
MOT999
set Pattern 46.Motion's custom string.
Custom string, string length is 12 byte
Inquire Motion Pattern's custom string
MOT001 (note 10)
MOT002 (note 11)
"????????????"(note 12)
OUT001
OUT002
OUT003
OUT004
OUT999
Select output format [PC]
Select output format [HD]
Select output format [DVI]
Select output format [HDMI]
Inquire output format status
OUT001
OUT002
OUT003
OUT004
OUT???
PAT???
PAT999
Select PATTERN P01~P50, ???=001~051
Inquire PATTERN status
PATxxx
PAT???
PCM001
PCM002
PCM003
PCM999
set LPCM 2CH
set LPCM 5.1CH
set LPCM 7.1CH
Inquire LPCM Channel status
PCM001
PCM002
PCM003
PCM???
RST001
System reset
RST001
TIM???
TIM999
Select TIMING T01~T39, ???=001~039
Inquire TIMING status
TIMxxx
TIM???
VER999
Inquire firmware version.
VER???(Ex:VER021=V2.1)
note 1: After computer sends command to the system, computer has to wait
for response from the system.
Then computer can send next command to the system.
If this system is under autorunning, RS-232 communications maybe fail.
note 2: To configurate Autorun follows a sequence of commands ---
ATIxxx …
note 3: If this system is not on Pattern 47.Color Setting, respond CRR300,
CRG300, CRB300 or CRY300.
note 4: Procedure of setting RX EDID name string :
send "ERX00?" -> wait "ERX00?" response -> send name string (12 bytes)
-> wait "ERX004"
note 5: In the name string, the rest unused bytes (<12bytes) should be filled
with 0x00.
11
