7.2 Rear panel
1
2
3
4
5
q
IR OUT ALL: This slot is where you connect the IR blaster cable included in
the package. Place it in a way so that all sources and devices are able to
receive the infrared signal.
②
IR OUT A~D: These slots are where you connect the included IR blaster
cables. Place them far away so that only the designated equipment will
be able to receive the infrared signal.
③
IR IN ALL: This is where you connect the IR receiver cable included in this
package. Place it anywhere you wish to control the source devices, using
their existing remotes.
④
IR IN 1~4: These slots are where you connect the IR receiver cables
included in the package. Place it near each display for receiving an IR
signal through the existing remote control.
⑤
DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
4
