4
7. Operation Controls and Functions
7.1 Front Panel
1 2
q
. Power LED: The green LED will illuminate when the power is connected
with AC wall outlet.
w
. SYNC: The LED will illuminate in green when the device has detected
with sync from source. This LED will also blink once while the power is
turned on.
7.2 Rear Panel
3
4
5
1 2
q
. EDID Switch STD/TV: This switch allows user to select the function of EDID
from TV or from the built-in EDID of the device. By switching the dip
switch to TV will allow the source to send out the signal according to
1st HDMI output’s EDID and by switching it to STD will allow the source
to send out the signal according to the set EDID recorded in the device.
The default setting is on TV, leave it as it is when the display is properly
playing. .
②
. SERVICE: This slot is for manufactory service purpose only.
③
. HDMI IN: This slot is to connect with input source equipment such as
DVD/Blue-Ray player with HDMI cable for video and audio input signal.
④
. HDMI Out 1~16: Thess slots are to connect with LCD TV or HD monitor for
both video and audio display simultaneously with HDMI cables.
t
. DC 5V: This slot is where you plug the 5V DC power supply into the unit
and connect the adaptor to an AC wall outlet.
