cypress solutions CTM ONE, Manual

Page: 8 / 31

© 2017 Cypress Solutions Manual: CTM ONE (Revision 1.0)
8 Physical Interfaces
3 Physical Interfaces
3.1
Ethernet:

One Ethernet port (bridged/non-bridged)

Ethernet services can be disabled

Ethernet ports can use DHCP or static IP addresses, DHCP can be configured to a single IP address.

Gateway support when an Ethernet port is used to connect to the Internet through another router.

Static NAT support
3.2
General Purpose Input and Outputs (GPIO)/Serial

14 position interface

Inputs x 4 (2 differential)

Outputs x 4

Console, Command Line Interface access

PAD host interface (1 available), Virtual Serial Line replacement

MODBUS host interface, MODBUS interface

Various auxiliary device support, contact Cypress Solutions for more details.
3.3
Auxilliary and IButton™

10 position interface

Auxiliary Equipment Interface

Ibutton™ interface access control hardware interface
3.4
USB OTG (On-The-Go) port

USB device port
3.5
CAN Bus port

8 position interface including power

Automotive CAN support (J1939, OBD2/ISO15765-4)

Silent mode support

2 CAN Interfaces:

1:HS-CAN (J1962 pin 6,14)

2:HS-CAN/MSCAN (J1962 pin 3,11)

SWCAN (J1962 pin 1)