Cypress Semiconductor EZ-USB GX3 CY4701, Reference Design Manual, Page: 14 / 23

Kit Operation
CY4701 EZ-
USB® GX3™ Reference Design Guide Doc. No. 001-97892 Rev. **
14
5. Click Next and wait until the driver is successfully installed. The previous steps will bind the CYUSB3610 test driver to
the GX3 device. The device will appear as Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller (Test
Driver) in Device Manager .
6. Run the GX3 EEPROM Programming Tool from Start > All Programs > Cypress > CY4701 RDK > GX3 EEPROM
Programming Tool.
For a detailed description of the Programming Tool, refer to the GX3 EEPROM Programming User Guide at
www.cypress.com/gx3 .
Figure 3-11 shows the startup screen of the Cypress GX3 EEPROM Programming Tool.
Figure 3-11. EEPROM Programming Tool Startup Screen
3.3.2 Parameter Configuration
You can configure the following parameters using the Cypress GX3 EEPROM Programming Tool:

Power supply system

Ethernet MAC Address

USB VID

USB PID

USB Manufacturer string

USB Product string

USB Serial Number

LED settings
To change the parameters, follow these steps: