CY3655-EXT enCoRe II Development Kit Guide, Doc. # 001-70268 Rev.*A
15
Kit Operation
3.3
5-Pin to USB Adapter
The 5-Pin to USB adapter is a small board that allows enCoRe II based devices to be programmed
through their USB cables using the MiniProg. This adapter is not designed to be used with the ICE-
Cube and ISSP cable due to cable length restrictions during programming. Please ensure that the
jumper J3 is set for encore II (E2).
Figure 3-3. 5-Pin to USB Adapter
3.4
Pin DIP Foot
The kit is provided with a 40-pin DIP foot and a 24-pin DIP foot. These foots are used to attach the
enCoRe II and Wireless enCoRe II pods on the applications board.
3.5
Program enCoRe II and Wireless enCoRe II on Applications Board
3.5.1
Program Using ICE-Cube
enCoRe II devices and Wireless enCoRe II devices can be programmed on the applications board
using the ICE-Cube. Follow these steps:
1. Plug the ICE-Cube into a PC using the USB cable. Power up the ICE-Cube.
2. Connect the 5-pin end of the ISSP cable on the 5-pin header (J2) of the applications board and
the other end to the ICE-Cube through the RJ45 adapter.
3. Make sure that no external power supply is connected to Vcc or GND on the applications board.
4. Launch PSoC Programmer.
5. Select the ICE-Cube from Port Selection, "USB/xxxxCxxx" where ‘x’ is specific to the USB device
ID of your ICE-Cube.
6. Program the hex file onto the enCoRe II device or Wireless enCoRe II device.
7. On successful programming, "
Programming Succeeded
" appears on the Actions pane.
3.5.2
Program Using MiniProg
enCoRe II devices and Wireless enCoRe II devices can be programmed on the applications board
using the MiniProg. Follow these steps:
1. Plug the MiniProg programmer into a PC using the USB A to Mini B cable.
2. Place the MiniProg programmer on the 5-pin header (J2) of the applications board.
3. Make sure that no external power supply is connected to Vcc or GND on the applications board.
4. Launch PSoC Programmer.
5. Select the MiniProg from Port Selection.
6. Program the hex file onto the enCoRe II device or Wireless enCoRe II device.
Summary of Contents for CY3655-EXT enCoRe II
Page 24: ...24 CY3655 EXT enCoRe II Development Kit Guide Doc 001 70268 Rev A Hardware...
Page 29: ...CY3655 EXT enCoRe II Development Kit Guide Doc 001 70268 Rev A 29 A Appendix A 1 Schematic...
Page 30: ...30 CY3655 EXT enCoRe II Development Kit Guide Doc 001 70268 Rev A Figure A 1 Prototyping Area...
Page 32: ...32 CY3655 EXT enCoRe II Development Kit Guide Doc 001 70268 Rev A A 2 2 PDC 9180 Bottom...
