12
CY3655-EXT enCoRe II Development Kit Guide, Doc. # 001-70268 Rev.*A
Getting Started
Figure 2-8. PSoC Programmer Window
3. Click on
File Load
from the menu bar to navigate and select the hex file.
4. Use the
Program
button to load the hex file onto the chip.
5. When programming is successful, ‘
Programming Succeeded
’ appears in the Actions pane.
6. Close PSoC Programmer.
Note
For more details on PSoC Programmer, see the user guide at the following location:
<Install_Directory>\Cypress\Programmer\<version>\Documents
.
2.4
Install Hardware
No hardware installation required for this kit.
Summary of Contents for CY3655-EXT enCoRe II
Page 24: ...24 CY3655 EXT enCoRe II Development Kit Guide Doc 001 70268 Rev A Hardware...
Page 29: ...CY3655 EXT enCoRe II Development Kit Guide Doc 001 70268 Rev A 29 A Appendix A 1 Schematic...
Page 30: ...30 CY3655 EXT enCoRe II Development Kit Guide Doc 001 70268 Rev A Figure A 1 Prototyping Area...
Page 32: ...32 CY3655 EXT enCoRe II Development Kit Guide Doc 001 70268 Rev A A 2 2 PDC 9180 Bottom...
