5.10. Test the board by moving your finger across the slider. The LEDs above the slider turn on
each time the corresponding slider segment is touched. Press the mechanical button at
the bottom of the board to turn on all four LEDs.
Notice how the Pin Status and Latched Value indicators change from OFF to ON when a
slider segment is touched.
5.11. Press the mechanical button at the bottom of the board to turn on all four LEDs.
Tune the Slider
5.12. From the
Select Pin
menu, select
Slider
.
5.13. Check
Show Differences
.
6.16. Assign each CapSense slider segment, LED, and mechanical button to the pin annotated
on the board. For example, the leftmost slider segment, Sldr1, is labeled GP0[3].
Drag each driver from the Unassigned list to the appropriate pin (listed on page 16 for con-
venience).
GP0[3]
GP1[4]
GP0[4]
GP1[3]
GP0[2]
Page 6
Page 15
