CYP XA-2, Operation Manuals, Page: 8 / 12

4 4
press ENTER (to select HDCP) → press SELECT 2 times (to select
HDCP2.2/Blue LED) → press ENTER (to confi rm HDCP selection) →
press SELECT again (to enter into PATTERN selection)→ press ENTER
(to select Patter) → press SELECT twice (to select Blue Scale/Blue
LED) → press ENTER (to confi rm Pattern selection) →
press SELECT again(to enter into Timing selection) → press ENTER(to
select Timing) → press SELECT 5 times(to select 4K2k60/Blue LED)) →
and press ENTER (to confi rm Timing selection).
Press ENTER together with EXIT to reset the setting back to default.
Note: If the ENTER button is not pressed after the selection is made
the setting will not be established and will remain under the
selection mode.
5 EXIT/TIMING Button: Press this button to exit/cancel the selection.
When exit selection mode press this button to select timing directly.
6 HDMI OUT: Connect with display/monitor with HDMI cable.