CYP PUV-1630TTX, Operation Manual, Page: 6 / 44

6
1. INTRODUCTION
The PUV-1630TTX is a brand new AV concept for the Commercial &
Corporate channel. Presentation equipment in corporate meeting rooms
can be difficult to operate and provide the user with challenges when
connecting their source to the installed AV system. Flexible meeting
rooms are also becoming more commonplace, which is where the
PUV-1630TTX provides the perfect balance between ease of use and
portability.
In collaboration with CMD the leading office power and lighting
specialists, CYP has developed a dedicated HDBaseT switcher and
Transmitter that fits seamlessly into the CMD 'Contour' range. Providing
the user with a flexible AV solution that removes the boundaries of how a
meeting space can be used.
The PUV-1630TTX Transmitter is a 2 x HDMI, 1 x VGA switch which allows
uncompressed HDMI and VGA signals to be transmitted over a Single
CAT5e/6/7 cable. This solution has the added features of analogue audio
em-bedding and a LAN connection over the same CAT5e/6/7 cable. These
combined HDMI and control signals can be transmitted up to lengths of
100 metres to a compatible PUV-1600 Series Receiver. When a device is
connected to the PUV-1630TTX, CEC control can be applied to 'power
up' the connected display and select the correct HDMI input channel
(programmed via the WebGUI).
This unit also supports automatic input detection between the HDMI
and the VGA inputs using hot plug detection, offering the user 'hands
free' control of the device. Despite the 10.2Gbps bandwidth limitation
of HDBaseT this clever transmitter will automatically convert signals of
higher bandwidths ensuring any HDMI 4KUHD signal can be passed
through the HDBaseT system. The unit also features push button control
on the front of the panel. The unit is powered by PoH supplied by a
compatible PUV-1600 series receiver.