CYP PU-160ETH, Operation Manual

Page: 8 / 24

7. Hardware Description
The following sections describe the hardware components of the unit.
Note:
Install the device driver of your Ethernet/USB to HDMI converter before
operating the device.
7.1 Product overview
Ethernet or
mini USB HDMI
Monitor PC/NB Ethernet to
HDMI device
7.2 Front Panel
Ethernet IN
INPUT
MINI USB
IN
Reset IP
Ethernet
MINI USB
USB Port
① ② ③ ④ ⑤
①
USB Port: These ports are the converter's USB Hub provision that allows user
to connect a USB Hard Drive, USB web camera, Keyboard or Mouse.
Note:
•
These two USB ports cannont be connected to USB Hub extension.
Doing so will trigger the system to detect the external USB Hub and
thereby cause a system failure.
•
Before removed the USB device, user must follow the USB device's
safely hardware removal procedure when removing the device.
Failure to do such action will cause the system to crash.
②
Mini USB IN: This port supports extension or mirror of video (via USB cable)
to your HDMI display, including both video and audio output signals.
③
Ethernet IN: This slot lets you connect a RJ-45 CAT5 cable to home IP
router or PC Ethernet port.
•
When connected directly to a PC Ethernet port, the user needs to
manually set the Internet Protocol (TCP/IP) to “169.254.10.1”.
•
If connect to an IP router, the system will automatically be connected
without the user setting up its Internet Protocol.
④
Input connection switch: This switch allows you to select the PC source
either via Mini USB port or through Ethernet port.
⑤
Reset IP: This button is only pressed to reset Ethernet IP address when the
system's IP address is incorrect.
4