CYP IP-6000RX, Operation Manual, Page: 8 / 28

4 4
Transmitter and Receiver after selecting.
7
Video LINK: The link status will be disabled and enable after press
button.
Quick Function Keys:
1. Reset to default (auto IP): Presses Link button and release
the button until Power and Link LED indicator fl ashing. Then
reconnects the power,the unit will goes to auto IP mode. The IP
will be assigned automatically by Transmitter. Please note that
the Transmitter and Receiver unit shall at same Network or the
connection between Transmitter and Receiver will fail.
2. Loopback function disabled: presses the link button for three
seconds, the loopback function will be disabled.
8
Video MODE: Selects to video mode for streaming data. Please
continue to press this button for 3 seconds to setting Anti-Dither
mode 1 bit, 2 bit, or off for ATI Graphic card. Anti-Dithering Mode
is design to provide dithering output. Dithering output is used
to make coloring looks better than it's original color depth. This
presents great diffi culty for Video Compression to maintain low
bandwidth even if the source display seems static. If the source
content does not generate dithering output, please turn off
this function or it will create a blocking effect. The video mode
improves live video smoothly. Normally, this extender set has
capability to automatically fi nal tune the live video. It is require to
access to video mode for further setting once video come with
slightly latency.
9
VGA BYPASS: Connects with VGA terminal block to send video to
display in order to monitor the video content simultaneously.