CYP Hyshare Pro, Operation Manual, Page: 19 / 52

13
8.4.2 Ethernet Tab
The Ethernet tab provides control over how the unit integrates into the local
wired networking environment; specifically, how the unit defines the IP
address used when accessing the WebGUI. Changes to this page will only
take effect after pressing the “Apply” button and some changes may require
the unit to reboot.
1) Obtain IP Address: Choose the method of defining the unit’s Ethernet
IP address. Selecting “DHCP” will have the unit attempt to automatically
obtain an IP address from a local DHCP server. Selecting “Static” allows
the user to manually enter the preferred IP address information below.
2) Ethernet MAC Address: Shows the MAC address used by the unit’s
Ethernet port.
3) IP Address: Displays the currently assigned IP address. In Static mode,
manual entry is allowed.
4) Subnet Mask: Displays the currently assigned subnet mask. In Static
mode, manual entry is allowed.
5) Gateway: Displays the currently assigned gateway address. In Static
mode, manual entry is allowed.
6) DNS 1 & 2: Displays the currently assigned DNS addresses. In Static
mode, manual entry is allowed.
Note: In some network environments, both fields may not be filled in.