CYP Hyshare Pro, Operation Manual, Page: 12 / 52

6
8. SYSTEM CONFIGURATION
8.1 Web Access
Step 1)
Make sure your computer and the Hyshare Pro are both connected
to the same network, either through a wired Ethernet connection (via
a local network switch), or through the unit’s Wi-Fi network.
Note: The Hyshare Pro’s default SSID is “WPS-HP210-xxxx” where
xxxx is the last 4 characters of its MAC address and the default Wi-
Fi password is “00000000”.
Step 2) Find the Hyshare Pro’s IP address by connecting it to an HDMI
display and checking the upper left corner of the OSD.
Step 3) Type the IP address into your computer’s web browser.
Note: Depending on the browser version used, it might be necessary
to accept a security exception to access the page.
Step 4) You should now see the Web Landing Page.
8.2 Web Landing Page
1) Administrator Login:
Click the gear icon ( ) in the upper right of
the screen to login to the unit as an administrator and access the
configuration pages.
Note: The default administrator password is “admin”, and it is strongly
suggested to change the default administrator password the first time
you configure your unit. You will be automatically logged out if idle for 15
minutes.