13
6.4.5 Cable Management Frame Installation
Up to 2 additional Cable Management Frames can be added to the back
of the chassis to provide more places to manage the various cables used
by installed units and power supplies. Route cabling by simply placing
the cables in the available slots, or by attaching the included plastic cable
management clips and bundling them within them.
STEP 1
Make sure that the 3 screw holes in the Cable Management Frame align with
all 3 of the screw holes on the back of the chassis where you wish to attach
it.
STEP 2
While holding the Cable Management Frame in place, screw in all 3 screws
that were included with the frame so that the frame is held securely in place.
Note: Be careful to not overtighten the screws as this could damage the
screw threads.
Summary of Contents for CSR-G6400
