3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
MENU
ENTER
SOURCE
-
+
HDMI
DP
VGA
1 2 3
4
5
6
7
8
9 10 11
1
POWER :
Press this button to power on the unit or place it into
stand-by mode.
2
POWER LED:
a. Power on: LED will illuminate solid green.
b. Stand-by mode: LED will illuminate solid red. Telnet, RS-232 and
WebGUI remain active in stand-by mode.
3
IR Window:
Accepts IR signals from the included IR remote for
control of this unit only.
4
MENU:
Press to enter the OSD menu, or to back out from menu
items.
5
ENTER:
Press to confirm a selection or to go deeper into a menu
item.
6
DOWN:
Press to move down within menus or to decrease volume.
7
UP:
Press to move up within menus or to increase volume.
8
SOURCE :
Press to sequentially switch through the available inputs
(HDMI, VGA and DisplayPort).
9
DP:
When the selected input source is DisplayPort this LED will
illuminate solid green.
10
HDMI:
When the selected input source is HDMI this LED will
illuminate solid green.
11
VGA:
When the selected input source is VGA this LED will illuminate
solid green.
