28
6.7 Remote Control Unit
1
POWER:
Press to power on
the unit or place it into stand-
by mode.
2
XGA:
Press to set the
output timing to XGA
(1024x768@60Hz).
3
INFO:
Press to show video
information on the OSD.
4
VGA IN:
Press to switch to the
VGA input.
5
HDMI IN:
Press to switch to
the HDMI input.
6
720p:
Press to set the
output timing to 720P
(1280x720@60Hz).
7
DP IN:
Press to switch to the
DisplayPort input.
8
MENU:
Press to bring up the
OSD menu.
9
ENTER:
Press to confirm a
selection or to go deeper
into a menu item.
10
MUTE:
Press to mute or un-mute the audio.
11
+/-:
Press to move up and down or adjust selections within menus.
12
VOL+/VOL-:
Press to increase or decrease volume.
CR-171
ENTER
MUTE
MENU
VGA IN
INFO
-
VOL
+
+
VOL
-
HDMI IN
XGA
DP IN
720P
1
6
7
11
12
23
2
34
5
8
9
10
