(8). Specifications
Computer input
Max computer input resolution
Computer input connector type
Computer input signal level
Video inputs
Video standard
Video input connectors
Scaled output resolutions
Scaled output vertical refresh rates &
Horizontal scan rates
Manual control
RS-232 control
IR remote control
Video adjustments
Weight
Dimensions
Power source
RGB with HV Sync
1280x1024
HD 15 Female
RGB @ 0.7V, H&V Sync @ TTL
Composite Video @ 1 Vp-p 75 ohm
S-Video @ 1 Vp-p 75 ohm
YPbPr Y : 1 Vpp 75 ohm
PbPr : 0.7 Vp-p 75 ohm
NTSC 3.58, PAL B/D/G/I
Composite video on BNC
S-Video on 4-pin Mini-DIN
Component on BNC
Pixels Format Scan
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
SXGA 1280 x 1024
WVGA 848 x 480
WXGA 1280x768
1360x768 1360x768
UXGA 1600x1200
Output resolution Vert. (Hz) Hori. (Hz)
59.94
31.469
VGA
SVGA
XGA
SXGA
WVGA
WXGA
1360X768
UXGA
60.320
37.880
60.000
48.360
60.020
60.00
59.99
60.02
60.0
63.981
31.020
47.396
47.712
75.000
Front panel buttons
Via rear panel DB9F connector
Yes
Brightness, Contrast, Color Saturation, Hue (NTSC), Detail1
1Kg
204(D)x 154 (W) x 46(H)mm
100~240VAC to DC 12V/1A Desktop switching adaptor
RGBHV
RGBHV
RGBHV
RGBHV
RGBHV
RGBHV
RGBHV
RGBHV
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
Progressive
9
(
7
)
. RS-232 Control of the CSC-210 Video Scaler
The Video Input selection and signal parameter setting for the CSC-210 can
also be controlled via an external control system by using the RS-232 port on the
unit. If information for this control method is required,beyond the scope of the
instructions provided in this section, please contact Cypress Technology Support,
A disk is provided with the CSC-210 containing a sample Windows Control Panel
that permits remote control of the unit from a PC via RS-232.
* The Connection between video scaler and remote controller with RS-232
modem cable.
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
TxD
RxD
NC
GND
NC
NC
NC
NC
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
RxD
TxD
NC
GND
NC
NC
NC
NC
Video Scaler
Remote Controller
* RS-232 transmission format:
Baud Rate : 9600 bps
Data Bit : 8 Bits
Parity: None
Stop Bit: 1 bit
Flow control:None
7
4
(
5
)
. Connecting and Installation
(
4
)
. Connecting the hardware
5
DC Adaptor
Rear Panel
1 . Composite Video input: Use a composite video cable to connect the composite
video output of the source equipment to the connector
labeled " Video" on the back of the Video Scaler.
2 . S-Video input: Use a S-Video cable to connect the S-Video output of the source
video equipment to the connector labeled " S-Video" on the back
of the Video Scaler.
S-Video provides improved performance over Composite Video
and is recommended over composite.
3 . YCbCr/YPbPr input: Use the component cable to connect the component
output of the source video equipment to the connectors
labeled YCbCr/YPbPr on the back of the video scaler.
4 . PC input: Connect the source computer's VGA output signal to the HD 15
connector labeled "PC In" on the back of the Video Scaler.
5 . PC output: Use the HD-15 cable to connect the output to the PC input of your
display monitor.
6 . RS232: 9-pin D-sub connector for connecting to your PC or other control console
for remote control.
7 . DC power jack: 12V 1A DC power input.
2
1
3
Rear Panel
4
5
7
6
Control In
S-VIDEO
VIDEO
Y
Cb/Pb
Cr/Pr
INPUT
PC IN
RGB
DC 12V
+
RS-232
OUTPUT
S-VIDEO
VIDEO
Y
Cb/Pb
Cr/Pr
INPUT
PC IN
RGB
DC 12V
+
RS-232
OUTPUT
PC Monitor
or
