4
6.2 Rear Panel
1
2
3
4
HDMI IN
HDMI OUT SERVICE
CONTROL
RS-232
IR IN
DC 5V
1
6
5
4
3
2
7
1
HDMI IN:
Connect from source equipment such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device for
input signal sending. The device obtain auto detection function
and will detect the last plug-in source for display on output when
it is unplugged, the device will detect rotationally from 1~4 input
source for display on output.
2
HDMI OUT:
Connect to HDMI TV/display or HD Amplifier for output
image and or audio display.
3
SERVICE:
This slot is reserved for firmware update use only.
4
CONTROL:
Connect from PC/Laptop with active internet service
for Telnet or WebGUI control with RJ-45 terminated cable.
5
RS232:
Connect from PC/Laptop for RS-232 command sending to
control the device.
6
IR IN:
Connect the IR Receiver included in the package for IR
signal receive from the included remote control.
7
DC 5V:
Connect the adaptor with power cord included in the
package and connect to AC wall outlet for power supply.
