3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
SYNC
INPUT
1
2
3
4
UHD 4 TO 1 SWITCHER
CPRO-U4H1HFS
1
2
3
4
1
IR Window:
This IR Receiver receives the remote control signal from
the packaged included remote control only with IR frequency at
38kHz.
2
POWER & LED:
Press this button to turn ON the device or set the
device to standby mode. The LED will illuminate in green when
switch to ON. This device contains power last memory and
therefore, when the power is connected the device will switch to
ON/Standby according to the last status.
*IP Reset:
Press this button together with INPUT button for 3 second
under power ON status, when the LED blink for once it means IP
Reset complete.
3
SYNC:
This LED will illuminate when both input source and output
display are linked with active signal.
4
IN 1~4:
Press the INPUT button to select an input from the 4 input
sources, LED will illuminated according to the selection.
