CYP CPRO-11SE2, Operation Manual

Page: 10 / 16

5
6.4 Rear Panel
DC 5V
Bitstream
TV
LPCM
2CH
Power
3 1 2
1
Audio EDID Switch: This switch allows users to select which audio
EDID settings are used for audio output.
TV Mode: Switch to TV mode to use the EDID settings of the display
connected to the HDMI output port.
Bitstream Mode: Switch to set the HDMI source device to output
the audio in bitstream mode (supports up to 5.1 channels of
compressed audio).
LPCM 2CH Mode: Switch to set the HDMI source device to output
the audio in LPCM 2CH mode.
Note: Depending on the input audio format, the unit may not
output audio through all output ports (See Section 8.2). For
Example, there will be no audio output from the L/R analog output
port when the input audio format is LPCM 5.1CH.
2
Power Button: Press to turn on the unit or to set it into standby
mode.
3
DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to an AC wall outlet.