6
6.3 Remote Control
1
POWER:
Press to power the unit on or
place it into stand-by mode.
2
1/A ~ 4/D:
Press these keys to configure
the video routing. Press the “OUT” key
followed by the key (A~D) of the outputs
you wish to route a source to (they
will flash to indicate selection). Next,
press the “IN” key followed by the input
(1~4) you wish to route to the selected
outputs. Finally, press “ENTER” to confirm
your selection and execute the routing
change.
Note:
Keys 5/E ~ 8/H have no function
with this matrix.
3
ALL:
Press this key to select all outputs
simultaneously for routing. Next, press the key of the input (1~4) you
wish to route to all outputs. Finally, press “ENTER” to confirm your
selection and execute the routing change.
MUTE:
Press this key to mute video output. Press the key of the input
(1~4) you wish to route then press mute key to mute video output.
INFO:
Switches the information displayed on each output’s OSD
between the user customized text and the current video/Ethernet
details.
PRESET:
Press to enter the preset call menu in the LCD window.
Press the “+/-” buttons followed by the “ENTER” button to select
and activate the preferred preset.
4
a. MENU:
Press to enter the LCD menu, or to back out from menu
items.
b. ENTER:
Press to confirm a selection within the LCD menu or to go
deeper into a menu item.
c. CANCEL:
Press to cancel newly made input/output/preset
routing selections before they have been confirmed.
d. Plus (+) / IN:
Press “+/IN” to navigate up within menus or to
begin the selection of an input for routing.
e. Minus (-) / OUT:
Press “-/OUT” to navigate down within menus or
to begin the selection of outputs for routing.
PRESET
- /
OUT
ALL
+ /
IN
INFO
MUTE
ENTER
CANCEL
MENU
CR-177
1 / A
2 / B
3 / C
4 / D
8 / H
5 / E
6 / F
7 / G
1
2
3
4
