CYP CPHD-V4, Operation Manual

Page: 97 / 120

92
COMMAND
Description and Parameters
$hdcp_out_ver N1

Set the HDCP version to use on the unit’s HDMI output.
Available values for
N1 :
V1.4 [HDCP v1.4]
V2.2 [HDCP v2.2]
Note: Affects Pattern mode only.
$hdcp_out_ver?

Show the current HDCP version used by the output port.
$hdr_eotf N1

Set the HDR EOTF (Electro-Optical Transfer Function) mode.
Available values for
N1 :
SDR [Traditional gamma, SDR lum. range]
HDR [Traditional gamma, HDR lum. range]
2084 [SMPTE ST 2084]
RSVD [Reserved for future use]
$hdr_eotf?

Show the current HDR EOTF mode.
$hdr_mcll N1

Set the maximum HDR content light level.
N1 = 0~65500 [Incremented in 100 unit steps]
$hdr_mcll?

Show the current maximum HDR content light level.
$hdr_mfall N1

Set the maximum HDR frame-average light level.
N1 = 0~65500 [Incremented in 100 unit steps]
$hdr_mfall?

Show the current maximum HDR frame-average light level value.