CYP CMSI-424L, Operation Manual

Page: 15 / 24

10
6.9 Telnet Control
Before attempting to use the Telnet control, ensure that both the
Matrix (via the LAN/Control port) and the PC/Laptop or control system
being used are connected to the same active network.
To access the Telnet control in Windows 7, click on the 'Start' menu
and type 'cmd' in the Search Field then press Enter (see below for
reference). Under Windows XP, go to the 'Start' menu and click on
'Run', type 'cmd' then press Enter.
Under Mac OS X, go to the file menu then navigate to
Go

Applications

Utilities

Terminal (see below for reference.)
Once in the Command Line Interface (CLI) type 'telnet' along with the
IP address of the unit you wish to control and '23' then hit Enter (see
below for reference). This will bring us into the device which we wish to
control.
Note: The IP address of the Matrix can be displayed on the device's
LCM monitor by pressing the Menu button twice.