CYP CMSI-424L, Operation Manual

Page: 12 / 24

7
6.7 RS-232 and Telnet Commands
COMMAND DESCRIPTION
A1~A4 Set output A to input 1, 2, 3 or 4
B1~B4 Set output B to input 1, 2, 3 or 4
C1~C4 Set output C to input 1, 2, 3 or 4
D1~D4 Set output D to input 1, 2, 3 or 4
ABCD...1~ABCD...4 Set output A, B, C or D to input 1, 2, 3
or 4 simultaneously
ABCD...0 Mute output A, B, C or D simultaneously
SETIP <IP> <SubNet> <GW> Set the IP, Subnet and Gateway
configuration (Static IP)
RSTIP Reset IP configuration to default values
(DHCP)
IPCONFIG Show the current IP configuration
P0 Power off
P1 Power on
STORE Store the current input and output
connections (01~04)
RECALL Recall the stored input and output
connections (01~04)
SHOW Show the input and output of the
sotred connections (01~04)
NAME Name the stored input and output
connections (N1=01~04) less than 8
characters (N2=A~H)
I1~I4 Set all outputs to input 1~4
I0 Mute all outputs
ST Show the current matrix state and
firmware version
RS Reset the system to A1, B2, C3, D4