CYP CM-1391, Operation Manual

Page: 4 / 8

Video to DVI
Scaler Box
Operation Manual
CM-1391
3
Use +,- button to move "V" to your desired parameter, then press MENU/ENTER
to enter into sub-menu of your selected parameter.
Picture Adjust
When Picture Adjust is selected a sub menu as below comes up.
Bright
Contrast
Color
Tint
Sharp
Default
Exit
USE +,- to move the tick (V) to your desired adjust item, Press the Menu/Enter
to confirm your selection.
At this point, the selected parameter will turn red, and you can use +,- to increase
or decrease the value of the parameter.
When adjustment is complete, Press "Menu" to leave the parameter. Move the tick "V"
to "Exit", then press menu/enter to exit.
(6). OSD Operation
After power on the unit , press the menu button to bring up the main menu
page as below:
Main Menu
Picture adj.
Output Setup
Exit
b. The format for analog PC output is RGB and for
analog HD output is YPbPr.
(5). Output Format
Default Range
16
16
16
16
05
OK
1-31
1-31
1-31
1-31
1-19
a. The format of digital DVI output is digital RGB
for all resolutions.
HDTV (RGBHV) HDTV (RGBHV)
-RGB
-RGB
-RGB
-RGB
-RGB
1080i-RGB
720p-RGB
576p-RGB
480p-RGB
1920x1080i
1280X720
720X576
720X480
UXGA
WUXGA -RGB
-RGB 1600 x 1200
1920 x 1200
1080p-RGB
1920x1080p follow input source
follow input source
follow input source
HDTV (YPbPr) HDTV (YPbPr)
-RGB
-RGB
-RGB
-RGB
-RGB
1080i-RGB
720p-RGB
576p-RGB
480p-RGB
1920x1080i
1280X720
720X576
720X480
UXGA
WUXGA -RGB
-RGB 1600 x 1200
1920 x 1200
1080p-RGB
1920x1080p follow input source
follow input source
follow input source